Cisco delivers a comprehensive portfolio of
switching solutions for Borderless Networks, data centers, and smaller
businesses. These solutions are optimized for a wide range of industries,
including service providers, financial services, and the public sector. The
WS-C3560V2-24TS-S Series Switches is an enterprise-class lines of stackable and standalone
switches.
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
stack-power switch switch-number
Enter the stack member number of the switch
in the power stack and enter switch stack power configuration mode. The range
is from 1 to 9.
Note Only
four switches can belong to the same power stack.
Step 3
stack [power-stack-name]
Enter the name of the power stack to which
the switch belongs. The name can be up to 31 characters. If you do not enter a
name and no other switches in the power stack have a name configured, a
power-stack name is automatically generated.
Step 4
power-priority switch value
Set the power priority of the switch. The
range is from 1 to 27. This value must be lower than the value set for the low
and high-priority ports.
Step 5
power-priority high value
Set the power priority of the PoE ports on
the switch that are configured as high-priority ports. The range is from 1 to
27, with 1 as the highest priority. The high value must be lower than the value
set for the low-priority ports and higher than the value set for the switch.
Step 6
power-priority low value
Set the power priority of the PoE ports on
the switch that are configured as low-priority ports. The range is from 1 to
27. This value must be higher than the value set for the low-priority ports and
the value set for the switch.
Step 7
end
Return to privileged EXEC mode.
Step 8
show stack-power
Verify your entries.
Step 9
copy running-config startup-config
(Optional) Save your entries in the
configuration file.
For more Cisco WS-C3560V2-48TS-S information please click
here
没有评论:
发表评论