MPLS branch site set up on a T3 line

Question:

I have a question on setting WS-C3750X-48PF-L up MPLS on a single T3 line.A client has contacted us to set up a 2951 at a branch location. There are 5 locations connected with MPLS.

They will split off 4meg of the T3 for mpls. The rest of the 45meg would go to the internet.They have two 1841's currently set up with a T1 line in each. One 1841 connects to the MPLS and the other to the internet.When the T3 is turned up by the provider, everything, internet and MPLS, will go through it. I asked for the current configurations, but I have not received them yet and this setup is due in a couple days. Given I've never configured MPLS before and I have a rudimentary understanding of how it works, any tips or configurations? I'd hate to be stuck on site and not equipped to complete the job.

Answer:

The way you configure the t3 circuit (channelized t3  inverse multipleing, ppp multilink, etc) on your side will largely  depend on the way your service provider delivers the service. I would recommend you get the details from your service provider and then post  the information if you need help with that part of the WS-C3750X-48P-L configuration.